Inspection Integrity Audits
Published: 2022-05-10 Revised: 2026-09-02
| Name | Description | Type |
|---|---|---|
| Excess Inspections | Technician has performed number of inspections in excess of the settings found in Settings > Quality Signals > Pace Targets (formerly Porches > Pace Settings). | Event |
| Final Monitoring Time Less Than X Seconds | Under normal circumstances, Chateau Mobile will prevent a technician from monitoring a component faster than the rate you set for each component type (and size) in the Inspection Sample Time setting in the Settings tab. This feature is designed to comply if you have a requirement to check, or audit, to confirm no component was monitored too quickly. Chateau is designed to PREVENT this kind of error, but also provides this tool to audit, check, and confirm the tool (and technicians) are all operating properly. | Event |
| Inspections After Hours | Inspections that occurred after the time set in the Flag inspections recorded after field on Settings > Quality Signals > Workday Schedule. Note: this audit looks at every inspection performed since it last ran, so the first run on an existing database can return a large backlog. | Event |
| Inspections Before Hours | Inspections occurring before the time set in the Flag inspections recorded before field on Settings > Quality Signals > Workday Schedule. Note: this audit looks at every inspection performed since it last ran, so the first run on an existing database can return a large backlog. | Event |
| Inspections With No GPS | Inspections that do not have GPS. Note: this audit looks at inspections created in the 30 days before the last run, and ignores OGI path inspections and readings with a 0,0 fix. | Event |
| Inspections Without Barcode | All inspections where the component's barcode was not scanned before recording the inspection. | Event |
See Types of Audits for descriptions of the "Type" column terms above.