Images / Video
Published: 2022-05-19 Revised: 2026-02-03
You can attach an image (photo) to any component. This image is taken with the camera in your PDA. This can be a valve, pump, connector, OGI Spot, etc.
You can take and tag an image to any OGI inspection. You will be prompted to do so when you record the inspection. This image should be taken with the camera – either normal photo or an IR photo. This photo will taken with your PDA, and can be attached to any M21 or AVO leak.
For OGI leaks, you will be prompted to take and tag an image and/or a video for each inspection, including all leaks. These will be taken with the OGI camera. You will also be prompted to take and tag an image and/or video with the Sensitivity Check.
For more details, check out the table, below.
| Type | Taken By | Taken When | Where Stored | Purpose |
|---|---|---|---|---|
| Target Image | Camera in handheld | The OGI Spot is documented and entered in Chateau | On the OGI Spot Component record in Chateau; transferred to Chateau Mobile with components when the inspection is due | Enable the tech to positively confirm he or she is imaging the proper component, equipment, or area. Also used in CMM to compare with the inspection image to QC the tech's work |
| Inspection Image | OGI Camera (still image) | Inspection is performed; image is attached to a specific inspection | Chateau on the Inspection Record | To document the leak or inspection process |
| Video | OGI Camera | At the tech's discretion; always attached to a specific inspection | Chateau on the inspection record | To document the leak or inspection process |
| Sensitivity Check Image and/or Video | OGI Camera | Sensitivity Check is confirmed | Chateau on the Sensitivity Check Record | To confirm the proper operation of the camera for the current day |
Note: While the standard practice is to attach images and videos captured with the OGI camera, Chateau also allows you to attach images and videos uploaded from any device to OGI inspections, should the need arise.